Status sensors with brackets are used to monitor the actuated status of toggle clamps.
The sensor detects whether the toggle clamp is open or closed and enables this status information to be processed electronically.
The sensor is attached to the toggle clamp via the bracket.

Stainless steel

Bright.

The status sensor and brackets are supplied unassembled.

Inductive sensor:
Output relay: PNP normally open (NO)
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Switch gap: 0.8 mm
Switching frequency: 5000 Hz
Short-circuit proof: yes
Reverse polarity protected: yes
IP rating: IP 67
Connection type: 0.3 m cable, PUR, with plug
Temperature range: -25° C - +70°C
Approvals: CE, c-UL-us, UKCA, WEEE

Temperature range: -25 °C to +70 °C

The status sensor is fastened to the bracket with the nuts and set to dimension L1.
The bracket is attached with the toggle clamp screws through holes between the foot and the mounting surface.
The switch point fine-tuning is carried out once the toggle clamp is mounted.
The detailed procedure is described in the assembly instructions.

Status sensors are not suitable for protecting people.

1) LED-indicator

BN = brown
BK = black
BU = blue

Horizontal toggle clamp with horizontal foot 05900.
Vertical toggle clamp with horizontal foot 05908.
Connector M8x1 bushing with screw lock, unshielded 80150.
Cable tie block 10451.

05900
05908
10451
80140